WELCOME TO THE NEW ROMAC PARTS WEBSITE. EXISTING CUSTOMERS WILL NEED TO RESET YOUR PASSWORD
7T4097 | Caterpillar End Bits-HOT CUPPED
Romac Item No
7T4097
Price
$400.00
Condition
New Used Rebuilt
Product Type: End Bits HOT CUPPED
Make: CATERPILLAR
Sub-Series: D10 SERIES
Thickness: 4.75
Width: 18.5
Hole 1 Qty: 7
Bolt Diameter: 1.25
Blade Type: End Bit
Hole 1 Distance End to 1st Hole: 3
Hole 1 Distance 1st to 2nd Hole: 6.75
Bolt 1 Qty: 3
Bolt 1 Length: 4.25
Hole 2 Distance 2nd to 3rd Hole: 7
Machine Type: BULLDOZER
Hole 1 Distance 2nd to 3rd Hole: 3
Hole 2 Distance 1st to 2nd Hole: 3
Length: 28.5
Bolt 2 Qty: 4
Bolt 2 Length: 4.25
Make: CATERPILLAR
Sub-Series: D10 SERIES
Thickness: 4.75
Width: 18.5
Hole 1 Qty: 7
Bolt Diameter: 1.25
Blade Type: End Bit
Hole 1 Distance End to 1st Hole: 3
Hole 1 Distance 1st to 2nd Hole: 6.75
Bolt 1 Qty: 3
Bolt 1 Length: 4.25
Hole 2 Distance 2nd to 3rd Hole: 7
Machine Type: BULLDOZER
Hole 1 Distance 2nd to 3rd Hole: 3
Hole 2 Distance 1st to 2nd Hole: 3
Length: 28.5
Bolt 2 Qty: 4
Bolt 2 Length: 4.25
Details
Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2 1/4"thick, 19"wide and 29"in length. It takes 7 of a 1 1/4"X 4 1/2"(125X450) plow bolt and 7 of a 1 1/4"(125 HEX NUT) hex nut. The bolt hole spacing is 7"from center to center of the first two bolt holes, and 3"from the 2nd to 3rd bolt hole and 3.13"when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 8E4541
Quality aftermarket cutting edges for Caterpillar (CAT), JCB, Bobcat, Takeuchi, John Deere, Case, Komatsu, Kubota and many others including manufacturers such as ESCO, Black Cat, Valley Blades for all your backhoe, grader, loader, skid steer and excavator cutting edge needs.
