WELCOME TO THE NEW ROMAC PARTS WEBSITE. EXISTING CUSTOMERS WILL NEED TO RESET YOUR PASSWORD
8J6412 | Caterpillar End Bits-LEVEL CUT
Romac Item No
8J6412
Price
$51.00
Condition
New Used Rebuilt
Product Type: End Bits LEVEL CUT
Make: CATERPILLAR
Sub-Series: D3 SERIES
Thickness: 0.75
Width: 6.5
Hole 1 Qty: 3
Bolt Diameter: 0.625
Blade Type: End Bit
Hole 1 Distance End to 1st Hole: 4
Hole 1 Distance 1st to 2nd Hole: 2.25
Bolt 1 Qty: 3
Bolt 1 Length: 2.25
Machine Type: BULLDOZER
Hole 1 Distance 2nd to 3rd Hole: 2.5
Length: 13
Make: CATERPILLAR
Sub-Series: D3 SERIES
Thickness: 0.75
Width: 6.5
Hole 1 Qty: 3
Bolt Diameter: 0.625
Blade Type: End Bit
Hole 1 Distance End to 1st Hole: 4
Hole 1 Distance 1st to 2nd Hole: 2.25
Bolt 1 Qty: 3
Bolt 1 Length: 2.25
Machine Type: BULLDOZER
Hole 1 Distance 2nd to 3rd Hole: 2.5
Length: 13
Details
Caterpillar style bolt on end bit for a D3 Caterpillar Bulldozer. This is a level cut right hand or left hand end bit that is .75"thick, 6.5"wide and 13"in length. It takes 3 of a 5/8"X 2 1/4"(625X225) plow bolt and 3 of a 5/8"(625 HEX NUT) hex nut. The bolt hole spacing is 2.5"from center to center of the bolt holes, and 4"when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 4T6229
Quality aftermarket cutting edges for Caterpillar (CAT), JCB, Bobcat, Takeuchi, John Deere, Case, Komatsu, Kubota and many others including manufacturers such as ESCO, Black Cat, Valley Blades for all your backhoe, grader, loader, skid steer and excavator cutting edge needs.
