WELCOME TO THE NEW ROMAC PARTS WEBSITE. EXISTING CUSTOMERS WILL NEED TO RESET YOUR PASSWORD
T101638 | John Deere Cutting Edges-41.50" LONG
Romac Item No
T101638
Price
$396.17
Condition
New Used Rebuilt
Product Type: Cutting Edges
Make: JOHN DEERE
Sub-Series: 444E SERIES
Thickness: 1
Width: 10
Hole 1 Qty: 3
Bolt Diameter: 0.75
Blade Type: Double Bevel
Hole 1 Distance End to 1st Hole: 6.75
Hole 1 Distance 1st to 2nd Hole: 14.25
Bolt 1 Qty: 3
Bolt 1 Length: 3
Machine Type: LOADER
Hole 1 Distance 2nd to 3rd Hole: 14
Length: 41.5
Make: JOHN DEERE
Sub-Series: 444E SERIES
Thickness: 1
Width: 10
Hole 1 Qty: 3
Bolt Diameter: 0.75
Blade Type: Double Bevel
Hole 1 Distance End to 1st Hole: 6.75
Hole 1 Distance 1st to 2nd Hole: 14.25
Bolt 1 Qty: 3
Bolt 1 Length: 3
Machine Type: LOADER
Hole 1 Distance 2nd to 3rd Hole: 14
Length: 41.5
Details
John Deere style bolt on center cutting edge for a 444E John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is 1"thick, 10"wide and 41.5"in length. It takes 3 of a 3/4"X 3"(750X300) plow bolt and 3 of a 3/4"(750 HEX NUT) hex nut. The bolt hole spacing is 13 15/16"from center to center of the bolt holes, and 6 13/16"when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # T146673
Quality aftermarket cutting edges for Caterpillar (CAT), JCB, Bobcat, Takeuchi, John Deere, Case, Komatsu, Kubota and many others including manufacturers such as ESCO, Black Cat, Valley Blades for all your backhoe, grader, loader, skid steer and excavator cutting edge needs.
