WELCOME TO THE NEW ROMAC PARTS WEBSITE. EXISTING CUSTOMERS WILL NEED TO RESET YOUR PASSWORD
T161731 | John Deere End Bits-14.88" LONG
Romac Item No
T161731
Price
$98.00
Condition
New Used Rebuilt
Product Type: End Bits
Make: JOHN DEERE
Sub-Series: 750 SERIES
Thickness: 0.75
Width: 8
Hole 1 Qty: 4
Bolt Diameter: 0.75
Blade Type: End Bit
Hole 1 Distance End to 1st Hole: 2
Hole 1 Distance 1st to 2nd Hole: 3
Bolt 1 Qty: 4
Bolt 1 Length: 2.5
Machine Type: BULLDOZER
Hole 1 Distance 2nd to 3rd Hole: 3
Length: 15
Make: JOHN DEERE
Sub-Series: 750 SERIES
Thickness: 0.75
Width: 8
Hole 1 Qty: 4
Bolt Diameter: 0.75
Blade Type: End Bit
Hole 1 Distance End to 1st Hole: 2
Hole 1 Distance 1st to 2nd Hole: 3
Bolt 1 Qty: 4
Bolt 1 Length: 2.5
Machine Type: BULLDOZER
Hole 1 Distance 2nd to 3rd Hole: 3
Length: 15
Details
John Deere style bolt on left hand end bit for a 750 John Deere Bulldozer. This is a level cut left hand end bit that is 0.75" thick, 8" wide and 14.88" in length. It takes 4 of a 3/4" x 2 1/2" (750X250) plow bolt and 4 of a 3/4" (750 HEX NUT) hex nut. The bolt hole spacing is 3" from center to center of the first two bolt holes, and 2" when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3".
Quality aftermarket cutting edges for Caterpillar (CAT), JCB, Bobcat, Takeuchi, John Deere, Case, Komatsu, Kubota and many others including manufacturers such as ESCO, Black Cat, Valley Blades for all your backhoe, grader, loader, skid steer and excavator cutting edge needs.
